Janome Iron On Backing Stabiliser 35cm Wide 10 Metre Roll Embroidery Machine

  • Janome

Description

Janome Iron-On Backing Stabiliser – 35cm (14") Wide | 10 Metre Roll

  • Material: iron-on tear-away stabiliser (bonds to fabric with heat)
  • Width: 35cm (approx. 14 inches)
  • Length: 10 metre roll
  • Construction: backing stabiliser — irons on beneath fabric to stabilise fibres and prevent puckering and distortion during embroidery
  • Origin: [please confirm]
  • Use cases: machine embroidery backing for woven fabrics, shirts, jackets, bags, and any fabric requiring firm underside support; use multiple layers for heavy stitch count designs
  • Sold as a single 10 metre roll
  • Part number: BB66110
  • No further discounts on this item

Janome Iron-On Stabiliser is a purpose-made embroidery backing — not an interfacing. This is an important distinction: interfacings are designed for dressmaking and have a degree of give, which makes them unsuitable for embroidery. Embroidery stabiliser is engineered to hold fabric fibres completely still under the needle, preventing the puckering and distortion that ruins an otherwise well-stitched design. The iron-on bond locks the stabiliser to the underside of your fabric before hooping, giving a firm, consistent base across the entire hoop area — which also protects the fabric from being stretched by the hoop itself.

To use: cut a piece large enough to cover the entire hoop area, place it on the reverse of your fabric with the adhesive side down, and press with a warm iron until bonded. Hoop the fabric as normal and stitch your design. Once complete, tear the stabiliser away from the back of the stitching. If it resists, run a warm iron over it briefly — this relaxes the bond and makes removal much easier. For designs with heavy stitch counts, use two or more layers for best results.

Colour accuracy: product images are representative. Actual appearance may vary slightly depending on your screen settings.

Janome Iron On Backing Stabiliser 35cm Wide 10 Metre Roll Embroidery Machine

  • Janome
Product form

Janome Iron-On Backing Stabiliser – 35cm (14") Wide | 10 Metre Roll Material: iron-on tear-away stabiliser (bonds to fabric with... Read more

Free pickup in our shop(s)

£19.66

1 in stock Express UK Shipping Available  

  • Free UK delivery on all orders above £30.00
  • Spend £45, save 5% automatically
    Delivery & Returns

    Delivery

    Free UK delivery on orders over £30.

    Orders placed before 1pm are dispatched same working day.

    Returns

    Not happy? Just send it back within 60 days of your purchase. Write your order number on the outside of the parcel (see example below), include a short note with the reason for the return, record your name and order number on the note. Upon receipt we will process your refund back to your account. No quibble, no hassle.

    Thread and Trimmings

    Returns/Refunds/(ORDER # HERE)

    Unit F5

    Aston Seedbed

    Birmingham

    B7 4NT

    Description

    Janome Iron-On Backing Stabiliser – 35cm (14") Wide | 10 Metre Roll

    • Material: iron-on tear-away stabiliser (bonds to fabric with heat)
    • Width: 35cm (approx. 14 inches)
    • Length: 10 metre roll
    • Construction: backing stabiliser — irons on beneath fabric to stabilise fibres and prevent puckering and distortion during embroidery
    • Origin: [please confirm]
    • Use cases: machine embroidery backing for woven fabrics, shirts, jackets, bags, and any fabric requiring firm underside support; use multiple layers for heavy stitch count designs
    • Sold as a single 10 metre roll
    • Part number: BB66110
    • No further discounts on this item

    Janome Iron-On Stabiliser is a purpose-made embroidery backing — not an interfacing. This is an important distinction: interfacings are designed for dressmaking and have a degree of give, which makes them unsuitable for embroidery. Embroidery stabiliser is engineered to hold fabric fibres completely still under the needle, preventing the puckering and distortion that ruins an otherwise well-stitched design. The iron-on bond locks the stabiliser to the underside of your fabric before hooping, giving a firm, consistent base across the entire hoop area — which also protects the fabric from being stretched by the hoop itself.

    To use: cut a piece large enough to cover the entire hoop area, place it on the reverse of your fabric with the adhesive side down, and press with a warm iron until bonded. Hoop the fabric as normal and stitch your design. Once complete, tear the stabiliser away from the back of the stitching. If it resists, run a warm iron over it briefly — this relaxes the bond and makes removal much easier. For designs with heavy stitch counts, use two or more layers for best results.

    Colour accuracy: product images are representative. Actual appearance may vary slightly depending on your screen settings.

    Recently viewed products

      © 2026 ThreadandTrimmings, Powered by Shopify

        • American Express
        • Apple Pay
        • Diners Club
        • Discover
        • Google Pay
        • Maestro
        • Mastercard
        • PayPal
        • Shop Pay
        • Union Pay
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account