Fusible interfacing, bonding webs, and sew-in foam for dressmaking, bag making, and craft. Featuring trusted brands including Vlieseline and Fuse-A-Web, with more products being added as our range grows.
Non-woven iron-on fusible interfacing in four weights and four cut lengths — adds body, structure, and stability to fabric with a single press of an iron. Brand: Thread and Trimmings Material: 100% non-woven polyester with LDPE heat-activated adhesive coating Width: Light, Medium, Heavy — 75cm (approx. 29.5"); Extra Heavy — 90cm (approx. 35.4") Lengths available: 1m, 2m, 5m, 10m Weights available: Light, Medium, Heavy, Extra Heavy HS Code: 5603121000 Country of Origin: China This non-woven fusible interfacing bonds firmly to the wrong side of fabric with a dry iron, giving collars, cuffs, waistbands, facings, and bag panels the structure they need without bulk. The heat-activated adhesive coating forms a consistent bond across the full width, and the non-woven construction resists fraying at cut edges. Four weights let you match the interfacing to the fabric: Light for silks and fine cotton voile, Medium for standard dress and craft cotton, Heavy for tailoring fabrics, and Extra Heavy for denim, canvas, and structured bag bases. Cut lengths from 1m to 10m mean you can buy exactly what you need for the project in hand. How to Order: Select your required Weight (Light, Medium, Heavy, or Extra Heavy) from the dropdown. Select your required Length (1m, 2m, 5m, or 10m). Choose a quantity and add to basket. Proceed to checkout. To apply: place the fusible (rough/dotted) side against the wrong side of your fabric. Press with a dry iron at 130–145°C for 12–15 seconds and allow to cool before handling. Machine washable on delicate cycle at 30°C. Do not dry clean.
£0.46 - £14.88
Double-sided fusible interfacing at 135gsm in three widths and three lengths — a firm, reliable bonding interfacing for structured sewing and craft projects. Brand: Thread and Trimmings Material: 100% nonwoven polyester with heat-activated adhesive on both sides Widths: 15cm (6"), 30cm (12"), 76cm (30") Weight: 135gsm Lengths: 1 metre, 5 metres, 10 metres Colour: White HS Code: 5603931000 Country of Origin: China This double-sided fusible interfacing bonds cleanly between two layers of fabric or to a single layer from either side, making it ideal for tiebacks, waistbands, collars, cuffs, bag panels, appliqué, and general craft stiffening. At 135gsm it gives firm structure without overwhelming finer fabrics. Washable at up to 40°C once fused. To apply: press with a hot dry iron for a temporary hold, or use a hot steam iron for 10 seconds each side for a permanent bond. Leave flat to cool fully before handling. Always test on a spare scrap first. How to Order: Select your width — 15cm (6"), 30cm (12"), or 76cm (30"). Choose your length — 1 metre, 5 metres, or 10 metres. Add to basket and proceed to checkout. Multiple metres are cut and supplied as one continuous piece wherever possible. Colours are represented as accurately as possible but may vary slightly depending on your screen settings.
£0.38 - £15.41
100% Cotton Woven Fusible Interfacing — Black and White, 112cm Wide 100% cotton woven construction — soft hand feel, breathable finish PA polyamide fusible coating — bonds cleanly and securely Width: 112cm (44 inches) Fusing temperature: 145°–155°C for 15–18 seconds Machine washable at 40° and suitable for dry cleaning Available in White and Black — select your colour from the options above Origin: China Uses: collars, cuffs, waistbands, facings, and structured garment sections Sold by the metre — order multiple metres for a continuous length Woven fusible interfacing follows the grain of your fabric, making it the preferred choice for tailored garments and natural fibre projects. Unlike non-woven alternatives, it moves with the fabric rather than against it — giving a more professional, couture-quality result. The cotton construction makes it particularly well-suited to cotton, linen, and lightweight wool fabrics. Black is ideal for dark-coloured garments where white interfacing might show through.Technical SpecificationMaterial: 100% CottonCoating: PA Polyamide (fusible)Width: 112cm (44 inches)Fusing Temperature: 145°–155°CFusing Time: 15–18 secondsCare: Machine wash 40° / Dry clean safeCountry of origin: ChinaHS Code: 5208510000Colour accuracy: Colours may appear slightly different depending on your monitor settings and lighting. If colour matching is critical, we recommend ordering a sample first.
£4.80 - £6.00
Vlieseline Waist Shaper 70mm (10-25-25-10) – 2.5cm Folded – Grey or White Achieve professional results when sewing waistbands with the Vlieseline Waist Shaper, available in grey or white, designed to support and shape skirt and trouser waistbands without the need for chalking or marking. Ideal for medium- to heavyweight fabrics, this waist shaper ensures a clean, crisp finish with ease. Key Features: Width: 70mm (folds to 25mm/2.5cm) Colour Options: Grey or White Suitable for medium to heavy fabrics Machine washable at 95°C and dry cleanable Easy Application Instructions: Cut the Waist Shaper to size and iron it onto the fabric waistband using dry heat and pressure. Fold the waistband in half and pre-iron the upper edge for a sharp crease. Attach the waistband to your skirt or trousers by sewing along the perforated line. Fold and stitch the edge; optionally, attach the lining at this stage. Complete by stitching the hemmed waistband from the right side through the seam. Available Lengths: 1m, 3m, 5m, and 10m – cut to order for your convenience. Explore our shop for a wide range of high-quality sewing supplies from trusted brands including Prym, Vlieseline, and Gutermann.
£0.68 - £6.84
Slotted Waist banding Interfacing 80mm Wide Charcoal Black / White Choose your length. Measured and cut from a factory fresh roll Wherever possible, multiples will be sent in one length This slotted waist banding stiffening helps to create perfect folded edges. It is heavy duty Its washable
£1.06 - £35.40
Vlieseline Style-Vil sew-in foam interfacing — 72cm wide, made in Italy, giving handbags, pouches, and cases a structured, cushioned finish without bulk. Brand: Vlieseline (Freudenberg) Material: Foamed fabric — sew-in (not iron-on) Width: 72cm (approx. 28") Sizes Available: ¼m (50×35cm), ½m (50×72cm), 1m (100×72cm), 2m (200×72cm), 3m (300×72cm) Colour: White/Natural Care: Machine washable · Dry cleanable HS Code: 5903209000 Country of Origin: Italy Style-Vil is the go-to foam interfacing for structured bag making. It sews cleanly, holds its shape well, and adds a satisfying padded hand feel to handbags, tote bags, clutches, glasses cases, phone pouches, and protective covers. It is also used for shoulder pads, caps, and millinery. High abrasion resistance means the structure lasts, and the smooth foam surface is easy to sew through without skipped stitches. How to Use & Order: Select your required length from the dropdown Add to basket Cut to size and sew in — do not iron on Baste or stitch to the wrong side of your outer fabric before construction Trim seam allowances after stitching to reduce bulk at seams
£3.42 - £40.98
Fuse-A-Web is the easy & clean way to affix fabric to fabric in appliqué and craft work. It is used in the same way as hemming web but has the advantage of being 50cm wide, making it suitable for bonding larger items. It also works as a hemming web when cut into strips.The web is paper backed & the only tools required are scissors & a hot iron. Width: 50cm (approximately 20 inches) Colour: White Material: Paper-backed iron-on bonding web Suitable for appliqué, motifs, hemming, crafts, and soft furnishings Can be cut into strips for use as hemming web Each length cut to order from the roll Wash at 30°C once bonded Origin: France Technical Specification Width: 50cm Colour: White Material: Paper-backed iron-on bonding web HS Code: 5603120000 Origin: France Brand: Fuse-A-Web How to Use Make sure the iron is set at the correct temperature for your fabric. If unsure, do a test piece first. Mark out on the paper side the rough size of the item to be bonded. Place the web side on the reverse of the item & iron the paper with a dry heat. Trim away the surplus web & paper around the item. Peel off the paper & place the object to be bonded, coated side down, onto the fabric in the required position. Cover with a damp cloth & iron bit by bit over your object, keeping the heat on for usually no more than 10 seconds. Allow the parts to cool down completely. Washing InstructionsWash at a low temperature — 30°C. Do not tumble dry. Cool iron only.
£3.79 - £37.99
Janome Solvy Water Soluble Stabiliser – 33cm (13") Wide | 10 Metre Roll Material: water soluble film (dissolves completely in cold water) Width: 33cm (approx. 13 inches) Length: 10 metre roll Construction: transparent topping stabiliser — sits on top of fabric during embroidery, not beneath it Origin: Taiwan Use cases: embroidery on towelling, velvet, draylon, fleece, knitwear and any pile or textured fabric; monogramming, quilting, lace making, buttonholes, edges, shadow work, thread sketching, applique, fagotting, 3D work, cut work and delicate fabrics Sold as a single 10 metre roll Comes with full instructions Part number: WS48610 No further discounts on this item Janome Solvy is a topping stabiliser designed to solve one of the most common embroidery headaches — pile fabrics swallowing your stitches. When you embroider directly onto towelling, velvet, or knitwear, the loops and fibres push up between the stitches and give a ragged, unprofessional result. Laying a sheet of Solvy on top of the fabric before hooping keeps the pile flat and gives the needle a clean, stable surface to stitch through. The result is sharper stitch definition and a much cleaner finish. To use: cut a piece slightly larger than your embroidery hoop, place it on top of your fabric, and hoop both together as normal. Stitch your design as usual. Once complete, tear away as much of the stabiliser as you can by hand — it perforates cleanly around the stitches. Any remaining residue dissolves completely when dabbed with cold water, leaving no stiffness or residue behind. Always use cold water, not warm, to avoid any risk of shrinkage on delicate fabrics. Colour accuracy: product images are representative. Actual appearance may vary slightly depending on your screen settings.
£19.64
Sulky Ultra Solvy Water Soluble Stabiliser – 33cm (13") Wide | 3 Metre Roll Material: heavy-weight water soluble film (dissolves completely in cold water) Width: 33cm (approx. 13 inches) Length: 3 metre roll Construction: twice as thick, strong and heavy as standard Solvy — transparent topping stabiliser for demanding embroidery applications Origin: [please confirm] Use cases: standalone lace designs, 3D embroidery work, monogramming, quilting, lace making, buttonholes, edges, shadow work, thread sketching, applique, fagotting, cut work and delicate fabrics; topping stabiliser for towelling, velvet, draylon, fleece and knitwear Sold as a single 3 metre roll Comes with full instructions Part number: US40403 No further discounts on this item Sulky Ultra Solvy is the heavy-weight version of the popular Solvy water soluble stabiliser. Where standard Solvy handles everyday topping tasks on pile fabrics, Ultra Solvy steps in for the more demanding jobs — particularly standalone lace and 3D embroidery designs where the stabiliser itself forms part of the structure during stitching. Its extra thickness and strength means it holds its shape under dense stitch counts without tearing, giving you clean, precise results even on the most intricate designs.To use: cut a piece slightly larger than your embroidery hoop, place it on top of your fabric (or use as a self-supporting base for lace work), and hoop as normal. Stitch your design as usual. Once complete, tear away as much of the stabiliser as possible by hand — it perforates cleanly around the stitches. Rinse any remaining residue away with cold water. Always use cold water, not warm, to avoid any risk of shrinkage on delicate fabrics.Colour accuracy: product images are representative. Actual appearance may vary slightly depending on your screen settings.
£25.73
Janome Iron-On Backing Stabiliser – 35cm (14") Wide | 10 Metre Roll Material: iron-on tear-away stabiliser (bonds to fabric with heat) Width: 35cm (approx. 14 inches) Length: 10 metre roll Construction: backing stabiliser — irons on beneath fabric to stabilise fibres and prevent puckering and distortion during embroidery Origin: [please confirm] Use cases: machine embroidery backing for woven fabrics, shirts, jackets, bags, and any fabric requiring firm underside support; use multiple layers for heavy stitch count designs Sold as a single 10 metre roll Part number: BB66110 No further discounts on this item Janome Iron-On Stabiliser is a purpose-made embroidery backing — not an interfacing. This is an important distinction: interfacings are designed for dressmaking and have a degree of give, which makes them unsuitable for embroidery. Embroidery stabiliser is engineered to hold fabric fibres completely still under the needle, preventing the puckering and distortion that ruins an otherwise well-stitched design. The iron-on bond locks the stabiliser to the underside of your fabric before hooping, giving a firm, consistent base across the entire hoop area — which also protects the fabric from being stretched by the hoop itself.To use: cut a piece large enough to cover the entire hoop area, place it on the reverse of your fabric with the adhesive side down, and press with a warm iron until bonded. Hoop the fabric as normal and stitch your design. Once complete, tear the stabiliser away from the back of the stitching. If it resists, run a warm iron over it briefly — this relaxes the bond and makes removal much easier. For designs with heavy stitch counts, use two or more layers for best results.Colour accuracy: product images are representative. Actual appearance may vary slightly depending on your screen settings.
£19.66
