Janome Solvy Water Soluble Stabiliser 33cm Wide 10 Metre Roll Embroidery

  • Janome

Description

Janome Solvy Water Soluble Stabiliser – 33cm (13") Wide | 10 Metre Roll

  • Material: water soluble film (dissolves completely in cold water)
  • Width: 33cm (approx. 13 inches)
  • Length: 10 metre roll
  • Construction: transparent topping stabiliser — sits on top of fabric during embroidery, not beneath it
  • Origin: Taiwan
  • Use cases: embroidery on towelling, velvet, draylon, fleece, knitwear and any pile or textured fabric; monogramming, quilting, lace making, buttonholes, edges, shadow work, thread sketching, applique, fagotting, 3D work, cut work and delicate fabrics
  • Sold as a single 10 metre roll
  • Comes with full instructions
  • Part number: WS48610
  • No further discounts on this item

Janome Solvy is a topping stabiliser designed to solve one of the most common embroidery headaches — pile fabrics swallowing your stitches. When you embroider directly onto towelling, velvet, or knitwear, the loops and fibres push up between the stitches and give a ragged, unprofessional result. Laying a sheet of Solvy on top of the fabric before hooping keeps the pile flat and gives the needle a clean, stable surface to stitch through. The result is sharper stitch definition and a much cleaner finish.

To use: cut a piece slightly larger than your embroidery hoop, place it on top of your fabric, and hoop both together as normal. Stitch your design as usual. Once complete, tear away as much of the stabiliser as you can by hand — it perforates cleanly around the stitches. Any remaining residue dissolves completely when dabbed with cold water, leaving no stiffness or residue behind. Always use cold water, not warm, to avoid any risk of shrinkage on delicate fabrics.

Colour accuracy: product images are representative. Actual appearance may vary slightly depending on your screen settings.

Janome Solvy Water Soluble Stabiliser 33cm Wide 10 Metre Roll Embroidery

  • Janome
Product form

Janome Solvy Water Soluble Stabiliser – 33cm (13") Wide | 10 Metre Roll Material: water soluble film (dissolves completely in... Read more

Free pickup in our shop(s)

£19.64

1 in stock Express UK Shipping Available  

  • Free UK delivery on all orders above £30.00
  • Spend £45, save 5% automatically
    Delivery & Returns

    Delivery

    Free UK delivery on orders over £30.

    Orders placed before 1pm are dispatched same working day.

    Returns

    Not happy? Just send it back within 60 days of your purchase. Write your order number on the outside of the parcel (see example below), include a short note with the reason for the return, record your name and order number on the note. Upon receipt we will process your refund back to your account. No quibble, no hassle.

    Thread and Trimmings

    Returns/Refunds/(ORDER # HERE)

    Unit F5

    Aston Seedbed

    Birmingham

    B7 4NT

    Description

    Janome Solvy Water Soluble Stabiliser – 33cm (13") Wide | 10 Metre Roll

    • Material: water soluble film (dissolves completely in cold water)
    • Width: 33cm (approx. 13 inches)
    • Length: 10 metre roll
    • Construction: transparent topping stabiliser — sits on top of fabric during embroidery, not beneath it
    • Origin: Taiwan
    • Use cases: embroidery on towelling, velvet, draylon, fleece, knitwear and any pile or textured fabric; monogramming, quilting, lace making, buttonholes, edges, shadow work, thread sketching, applique, fagotting, 3D work, cut work and delicate fabrics
    • Sold as a single 10 metre roll
    • Comes with full instructions
    • Part number: WS48610
    • No further discounts on this item

    Janome Solvy is a topping stabiliser designed to solve one of the most common embroidery headaches — pile fabrics swallowing your stitches. When you embroider directly onto towelling, velvet, or knitwear, the loops and fibres push up between the stitches and give a ragged, unprofessional result. Laying a sheet of Solvy on top of the fabric before hooping keeps the pile flat and gives the needle a clean, stable surface to stitch through. The result is sharper stitch definition and a much cleaner finish.

    To use: cut a piece slightly larger than your embroidery hoop, place it on top of your fabric, and hoop both together as normal. Stitch your design as usual. Once complete, tear away as much of the stabiliser as you can by hand — it perforates cleanly around the stitches. Any remaining residue dissolves completely when dabbed with cold water, leaving no stiffness or residue behind. Always use cold water, not warm, to avoid any risk of shrinkage on delicate fabrics.

    Colour accuracy: product images are representative. Actual appearance may vary slightly depending on your screen settings.

    Recently viewed products

      © 2026 ThreadandTrimmings, Powered by Shopify

        • American Express
        • Apple Pay
        • Diners Club
        • Discover
        • Google Pay
        • Maestro
        • Mastercard
        • PayPal
        • Shop Pay
        • Union Pay
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account